SAMA Power Supplies

↪ Notes: The OCP and OPP triggering points need tuning. Very good ripple suppression, and decent component quality. Excellent noise profile.

↪ Notes: Mediocre load regulation on the minor rails, and poor excursion response in the 200% test. The OCP and OPP triggering points are set too high on all rails. 1000W model has high inrush currents. Good performance otherwise.

↪ Notes: Mediocre load regulation on the minor rails, and poor excursion response in the 200% test. The OCP and OPP triggering points are set too high on all rails. 1000W model has high inrush currents. Good performance otherwise.

↪ Notes: Mediocre load regulation on the minor rails, and poor excursion response in the 200% test. The OCP and OPP triggering points are set too high on all rails. 1000W model has high inrush currents. Good performance otherwise.

↪ Notes: SAMA increased the power-good signal's hold-up time by a lot, which makes this PSU a possible danger to hardware.

↪ Notes: Nearly identical to the XF.

↪ Notes: Black Diamond with a PCIe 5.0 interface.

↪ Notes: 122mm depth; same platform as Enermax Revolution D.F. 12, but with cheaper components.

↪ Notes: Electrical performance is mediocre and OCP triggering points are sky high. Recommended only for low-end hardware.

↪ Notes: OCP did work, but the PSU died in the process, which is not ideal. Recommended only for low-end hardware. See testing here.

↪ Notes: Failed JonnyGuru's burn-in test (gave up the ghost), protections are poorly misconfigured on this platform.

↪ Notes: Based on the same platform as the Black Hole; OTP untested; some parts remain unidentifiable; white variant available.