Tier A+ Power Supplies

↪ Notes: ATX 3.0 refresh

↪ Notes: Semi-digital

↪ Notes: Semi-digital

↪ Notes: Totem pole PFC

↪ Notes: Excellent electrical performance, component quality, and noise profile. 12V-2x6 connector has thermistors to act as an "OTP", optional "5V Boost."

↪ Notes: Optional "5V Boost" button which increases +5V by 200mV; bridgeless PFC. 12V-2x6 connector has thermistors to act as an "OTP".

↪ Notes: Interleaved PFC; digital operation for primary, APFC and 12V; minor rails are analog.

↪ Notes: Interleaved PFC; digital operation for primary, APFC and 12V; minor rails are analog.

↪ Notes: Semi-digital

↪ Notes: White model available, same internals.

↪ Notes: "Semi-digital" - offers digital fan control and monitoring via MasterPlus software; actual components are analog.

↪ Notes: Same internals as the Plus Platinum without the screen, ARGB fan, or digital control.

↪ Notes: Built-in screen, ARGB fan, and digital fan control and monitoring via MasterPlus software.

↪ Notes: Rated for 850W under 115VAC and advertised as 850W in North America.

↪ Notes: Rated for 1100W under 230VAC, but can still be used under 115VAC for 850W.

↪ Notes: Same platform as the Edge Platinum but with active cooling; full 1300W rating regardless of input range.

↪ Notes: 160mm length, Sunon Magnetic Levitation (Maglev) bearing fan.

↪ Notes: Grey label; RM-x v1 with digital monitoring features

↪ Notes: Modular inputs on side of PSU rather than the rear. Use caution and check case clearances: see Jon Gerow's list of cases (archive)

↪ Notes: Gray label. Per-connector 40A OCP when multi rail is enabled

↪ Notes: Grey label; RM-x v1 with digital monitoring features

↪ Notes: 160mm length

↪ Notes: Semi-digital. Good noise profile. 5VSB OCP is set quite high. Look above for case clearance list.

↪ Notes: Class-leading performance, excellent build quality, relatively quiet for the capacity.

↪ Notes: Grey label; potential issues with heavy transient loads.

↪ Notes: Black label, triangle fan grille. Digital monitoring and semi-passive operation controlled via USB-C connector in software.

↪ Notes: Refresh with included 12V-2x6 cable and listed ATX 3.1 compliance. Actual design appears to be the same internally.

↪ Notes: 10th anniversary limited run, only 100 units with white casing & white LEDs inside.

↪ Notes: 180mm length, Sunon Magnetic Levitation (Maglev) bearing fan.

↪ Notes: Gray label. Per-connector 40A OCP when multi rail is enabled

↪ Notes: Refresh with included 12V-2x6 cable and listed ATX 3.1 compliance. Actual design appears to be the same internally.

↪ Notes: Minor changes on the primary side, overall very similar; merely a refresh. Embossed cables instead of flat cables from older generations. (Fancy)

↪ Notes: Black label, triangle fan grille. Digital monitoring and semi-passive operation controlled via USB-C connector in software.

↪ Notes: Refresh with included 12V-2x6 cable and listed ATX 3.1 compliance. Actual design appears to be the same internally.

↪ Notes: Grey label; totem pole PFC, fully digital aside from 5VSB.

↪ Notes: 850W model can come in white.

↪ Notes: Semi-digital. Outstanding performance per Aris' review.

↪ Notes: Identical to the PTM X Pro made for ATX 3.0 compliancy.

↪ Notes: Insane performer, extremely quiet, however the 850W model is discontinued.

↪ Notes: Highly likely a similar platform to the PTM Pro ATX 3.0, OTP works in similar configurations (PTM Pro). Superb electrical performance.

↪ Notes: Interleaved PFC, semi-digital

↪ Notes: Available in black and white

↪ Notes: Semi-digital, interleaved PFC, magnetic levitation (maglev) bearing fan

↪ Notes: Fanless

↪ Notes: Excellent overall performance, component, and build quality, quietest SFX unit in its class.

↪ Notes: White variant available at 1kW.