500W Power Supplies
Browse 124 500W units with full specs and sorting.
Search through power supply units by various criteria including brand, wattage, tier, topology, ODM, and more
Showing 75 of 124 entries in 500W
↪ Notes: APFC - no 80 Plus or Cybenetics rating
↪ Notes: Qualified for 80+ Silver in testing
↪ Notes: 5VSB has >60mV of ripple in crossloads and OCP is poorly tuned, with high ripple for all rails.
↪ Notes: "Full Range" version is equally as bad according to the claimed specs.
↪ Notes: Updated H6
↪ Notes: PPFC
↪ Notes: Sleeve-bearing fan.
↪ Notes: PPFC; e-waste
↪ Notes: PPFC; e-waste
↪ Notes: PPFC; e-waste
↪ Notes: PPFC; e-waste
↪ Notes: PPFC; e-waste
↪ Notes: Custom be quiet! rifle bearing fan.
↪ Notes: Sleeve bearing fan, during OPP testing at around 30% of the 500W model do the minor rail falls out of ATX specification.
↪ Notes: "85% 230V only", ketchup and mustard cables. Outdated and no official 80+ certification, only on the tier list since it's still on their website.
↪ Notes: Yellow on black label; no 80+ certification and aging. Not certain on topology but not recommendable regardless. See review here. No OCP.
↪ Notes: Blue label. No OCP.
↪ Notes: Basically Elite V4 but full range
↪ Notes: Gray label
↪ Notes: Grey label
↪ Notes: Green "CX" lettering on black label. 85C caps all around, 30C rated operating temp, avoid.
↪ Notes: Green "CX" lettering on black label. 85C caps all around, 30C rated operating temp, avoid.
↪ Notes: Protections are found to be working in GPW based units in similar or identical configurations.
↪ Notes: All wattages exhibit various issues regarding 12V OCP. 700W notably has a large voltage drop out of ATX spec, and all experience high ripple.
↪ Notes: Single EPS cable, failing or near failing 3.3V transient response, hold-up time not within ATX specifications.
↪ Notes: Same internals as the Revobron, simply a 2.0 refresh.
↪ Notes: No OCP on 12V, OCP on the minor rails and OPP are both set way too high to be effective, no OTP, poor build quality.
↪ Notes: See notes under Series name for how to identify each version.
↪ Notes: See notes under Series name for how to identify each version.
↪ Notes: See notes under Series name for how to identify each version.
↪ Notes: See notes under Series name for how to identify each version.
↪ Notes: Malfunctioning safety protections that cause the unit to experience catastrophic failure and blow up. Fire hazard.
↪ Notes: Out of ATX spec ripple on 3.3V rail, fails 80+ Gold efficiency spec,
↪ Notes: Identical to the Hydro Pro, simply the semi modular variant.
↪ Notes: Initial batches of the unit were shipped without the OCP chip, supposedly newer batches have this new fuse chip but yet confirmed.
↪ Notes: Lacks protections, not independently regulated.
↪ Notes: Doesn't claim certain protections, old outdated platform.
↪ Notes: Sleeve bearing fan.
↪ Notes: PPFC, extremely poor build quality and component quality; e-waste.
↪ Notes: PPFC, extremely poor build quality and component quality; e-waste.