600W Power Supplies
Browse 110 600W units with full specs and sorting.
Search through power supply units by various criteria including brand, wattage, tier, topology, ODM, and more
Showing 75 of 110 entries in 600W
↪ Notes: Qualified for 80+ Silver in testing
↪ Notes: Cybenetics Silver
↪ Notes: 5VSB has >60mV of ripple in crossloads and OCP is poorly tuned, with >50mV ripple for 5VSB and 3.3V, but these are not heavily loaded rails.
↪ Notes: "Full Range" version is equally as bad according to the claimed specs.
↪ Notes: Updated H6
↪ Notes: Sleeve-bearing fan.
↪ Notes: Be wary that more variants of the Prestige are made! Same platform as Xigmatek Hydra M.
↪ Notes: Very low build quality, basically e-waste
↪ Notes: PPFC; e-waste
↪ Notes: PPFC; e-waste
↪ Notes: PPFC; e-waste
↪ Notes: Custom be quiet! rifle bearing fan.
↪ Notes: Sleeve bearing fan, during OPP testing at around 30% of the 500W model do the minor rail falls out of ATX specification.
↪ Notes: Basically Elite V4 but full range
↪ Notes: Braided cables, some units manufactured between Oct. 2019 to Mar. 2020 (lot codes 194448xx to 201148xx) recalled for potential failures.
↪ Notes: Standard cables
↪ Notes: Grey label
↪ Notes: Green "CX" lettering on black label. 85C caps all around, 30C rated operating temp, avoid.
↪ Notes: Green "CX" lettering on black label. 85C caps all around, 30C rated operating temp, avoid.
↪ Notes: Mediocre quality capacitors.
↪ Notes: OEM and platform is unconfirmed, unit is basically e-waste though.
↪ Notes: All wattages exhibit various issues regarding 12V OCP. 700W notably has a large voltage drop out of ATX spec, and all experience high ripple.
↪ Notes: Single EPS cable, failing or near failing 3.3V transient response, hold-up time not within ATX specifications.
↪ Notes: Same internals as the Revobron, simply a 2.0 refresh.
↪ Notes: No OCP on 12V, OCP on the minor rails and OPP are both set way too high to be effective, no OTP, poor build quality.
↪ Notes: See notes under Series name for how to identify each version.
↪ Notes: See notes under Series name for how to identify each version.
↪ Notes: See notes under Series name for how to identify each version.
↪ Notes: See notes under Series name for how to identify each version.
↪ Notes: Uncommon and possibly limited to the Australian market?
↪ Notes: Malfunctioning safety protections that cause the unit to experience catastrophic failure and blow up. Fire hazard.
↪ Notes: Out of ATX spec ripple on 3.3V rail, fails 80+ Gold efficiency spec,
↪ Notes: Lacks protections, not independently regulated.
↪ Notes: Doesn't claim certain protections, old outdated platform.
↪ Notes: Traditional thin circular fan grille.
↪ Notes: Uses hexagonal (in a circular shape) and oblong fan grilles.
↪ Notes: PPFC, extremely poor build quality and component quality; e-waste.
↪ Notes: PPFC, extremely poor build quality and component quality; e-waste.
↪ Notes: Costdown NO-817. 85c bulk cap.
↪ Notes: Sometimes referred to as the "Super Gold", OEM Performance GD.
↪ Notes: Simplicity HPG, just with a red LED 120mm fan.
↪ Notes: Naming scheme is +50W from the advertised 12V wattage. Numerous minor issues, very loud, and OCP is set way too high on the minor rails.
↪ Notes: 500W variant's +12V output is rated for 480W. Rifle-bearing fan (PY-1225M12S)